Redsn0w 0.9.9b9 – 0.9.9b9d erschienen – iOS 5.0.1 Support und Custom Firmware unter Windows erstellen
am 19. Dez 2011 von griesgram geschrieben unter Allgemein, Apple, iPad, iPhone, iPhone 3GS, iPhone 4, iPod Touch, Jailbreak

Die Weihnachten stehen vor der Tür und der Jailbreak bzw. Downgrade Weihnachtsmann ist auch schon da.
Das iPhone Dev Team hat das Redsn0w Jailbreak Tool in der Version 0.9.9b9, 0.9.9b9b für Windows und MacOSX und Redsn0w 0.9.9b9c für Windows veröffentlicht.
Update 20.Dezember 2011: Das iPhone Dev hat bereits Redsn0w in der Version 0.9.9b9d veröffentlicht, welches ein Problem beim iPhone 3GS mit altem Bootrom und dem untethered Jailbreak behebt. Download in diesem Beitrag weiter unten
Die neue Version unterstützt neu die iOS 5.0.1 Firmware und beinhaltet diverse neue Funktionen wie “Jailbreak”, “Just Boot”, “Fetch blobs”, “Stitch blobs” und “Recovery Fix”. Des Weiteren kann man mit Redsn0w 0.9.9b9b und Redsn0w 0.9.9b9c neu auch unter Windows eine Custom Firmware erstellen.
Mit diesen beiden Redsn0w Versionen und der Funktion “Stitch blobs” kann man sein Gerät wieder auf eine ältere iOS 5.0 Firmware downgraden. Des Weiteren kann man SHSH Blobs sichern und den Recovery Loop fixen. Redsn0w 0.9.9b9, 0.9.9b9b und 0.9.9b9c beinhaltet zudem ein iBook Fix für iOS 5.0 und iOS 5.0.1.
Update #17: The holiday season is almost here (Happy Holidays!) so we realize everyone is busy (especially @pod2g!). And even though we always recommend that jailbreakers stay where they are until a new untethered JB comes out, that’s not always possible. So we’ve updated redsn0w for those who may have found themselves at iOS 5.0.1, and added some other useful features too:
- native support for 5.0.1 (no need to point redsn0w at 5.0 IPSW or use command-line args)
- Support automatically extends to all of redsn0w’s various functions: “Jailbreak”, “Just boot”, “Fetch blobs”, “Stitch blobs”, “Recovery Fix”
- iBooks fixed in 5.0 and 5.0.1. This is a targeted fix that doesn’t remove entire sandbox mechanism. 5.x users already using redsn0w “Just Boot” can just use the new version without redoing entire jailbreak again
- 3GS old-bootrom owners can now create custom IPSWs without blobs
- ultrasn0w compatability update (i.e. same baseband requirements) for 5.0.1 will be available on Cydia Monday
- support for newer 8GB iPhone4 (which until now had problems with “Fetch blobs”). Thanks to @JKjeepnJeff for loaning us one of these newer i4 units for testing!
- allows Windows users (not just OS X users) to use the “Custom” button to create IPSWs without baseband updates. (Update: please wait for 0.9.9b9b for this!)
- accommodates APTickets in 5.x (until next Apple countermove). APTickets are crypto-verified before submitting to Cydia, just like the main blobs. Cydia server support for sending back the APTickets is upcoming. For now, use stitched IPSWs for 5.x. Due to APTickets, stitched 5.x IPSWs now require user to start in “Pwned DFU” mode
- Support added for stitching 4.x blobs to iPad2-GSM IPSWs. Similar to @notcom’s TinyCFW but doesn’t require lots of RAM or a TSS-assisted restore. Won’t work for iPad2 5.x blobs (or iPhone4S at all) until a bootrom-level exploit is out
- top line now shows whether (and where) a redsn0w update is available, or if the version being run is the latest. Uses DNS TXT record to alleviate any concerns about snooping
no 5.1 beta support at this time (major apps like Cydia are not yet compatible)- @pod2g has been doing a great job porting his 5.x untether…check his blog for updates!
- Owners of newer 3GS iPhones must not flash the iPad baseband. The iPad baseband will not work on 3GS iPhones built later than 2011 week 35. You have a week 35 or later device if your serial # starts with xx135.
Update #17b: Version 0.9.9b9b enables the “Custom” button for Windows users, and make the 3GS week 35 warning a more explicit part of the process.
This is still a tethered jailbreak for all except old-bootrom 3GS users.
Update #17c: For those Windows users encountering launch errors due to the self-update check, please use this version instead for now.
Update #17d: iPhone3GS owners in our comments section below noticed a problem with the untethered jailbreak available for the old-bootrom 3GS. We’ve corrected that problem in 0.9.9b9d. If you have an old-bootrom 3GS and have already used last night’s redsn0w on it, you can re-run it again without losing anything. Just use this new version, go to Extras->IPSW and manually select the 5.0.1 IPSW, then go back and Jailbreak it again (but you can uncheck Cydia because it’s already installed).This is still a tethered jailbreak for all except old-bootrom 3GS users.
Wichtig:
- Cydia Server sendet noch keine APTickets zurück
- Wenn ihr eine Custom Firmware mit der Stiching Funktion erstellt, müsst ihr euer Gerät wegen den enthaltenen APTickets in dem “Pwned DFU Mode” starten.
- Unterstützt Stitching von 4.x Blobs für iPad2-GSM Firmware. Funktioniert jedoch nicht beim iPad 2 mit 5.x Blobs bis ein Bootrom Exploit erschienen ist.
- Benutzer mit einem 3GS Modell dürfen das iPad BB nicht auf ihr Gerät flashen. Das iPad Baseband funktioniert bei Geräten die nach der Woche 35 im Jahr 2011 gebaut wurden nicht!
- Benutzer die Probleme haben Redsn0w 0.9.9b9b unter Windows zu starten, müssen Redsn0w 0.9.9b9c verwenden damit sie Redsn0w erfolgreich starten können.
Hinweis: Alle neuen iPhone 3GS Geräte haben eine Seriennummer die mit xx135 starten.
Welche Geräte werden Unterstützt:
- iPod touch 3G
- iPod touch 4G
- iPad 1
- iPhone 3GS
- iPhone 4 (GSM)
- iPhone 4 (CDMA)
Download Redsn0w
Redsn0w 0.9.9b9, 0.9.9b9b, 0.9.9b9c sowie 0.9.9b9d für Windows und Mac OSX kann man von einem der folgenden Links herunterladen:
Hinweis: Wir empfehlen euch Redsn0w 0.9.9b9d sowohl bei MacOSX als auch Windows zu verwenden.
Redsn0w 0.9.9 Beta 9d - Windows (885)
Redsn0w 0.9.9 Beta 9d - No Version Check - Windows (188)
Redsn0w 0.9.9 Beta 9d - MacOSX (286)
Redsn0w 0.9.9 Beta 9c - Windows (289)
Redsn0w 0.9.9 Beta 9b - Windows (34)
Redsn0w 0.9.9 Beta 9b - MacOSX (36)
Redsn0w 0.9.9 Beta 9 - Windows (23)
Redsn0w 0.9.9 Beta 9 - MacOSX (22)
Viel Spass beim jailbreaken mit der neuesten Redsn0w Version wünscht euch das hack2learn Team
Das könnte dich auch interessieren:
Copyright © www.hack2learn.org
Dieser Beitrag ist für den persönlichen, nicht-kommerziellen Gebrauch bestimmt. Die durch die Seitenbetreiber erstellten Inhalte und Werke auf diesen Seiten unterliegen dem deutschen Urheberrecht. Die Vervielfältigung, Bearbeitung, Verbreitung und jede Art der Verwertung ausserhalb der Grenzen des Urheberrechtes bedürfen der schriftlichen Zustimmung des jeweiligen Autors bzw. Erstellers.
(Digital Fingerprint: d3d3LmhhY2sybGVhcm4ub3Jn)
-
http://www.facebook.com/people/Christian-Pysall/100000155651162 Christian Pysall
-
http://www.facebook.com/skoelchens Sebastian Koelchens
-
http://www.hack2learn.org/ hack2learn
-
http://www.facebook.com/skoelchens Sebastian Koelchens
-
http://twitter.com/aticel Atilla Yücel





AppleTV3,1_5.0_9B206f_Restore.ipsw



